Steelcote Products

Epo-Line 161 - Coating System



Epo-Line 161 - 2 coats (8 mils each)

Diagram of Epo-Line 161 with 2 coats Most common method - used on warehouse floors, rinse load pads, and secondary containment structures.




Epo-Line 161 - 2 coats with fiberglass

Diagram of Epo-Line 161 with fiberglass cloth

Used, in many cases, for areas susceptible to cracking, such as sump pit seams.





Epo-Line 161 - 2 coats with non-skid aluminum oxide

Diagram of Epo-Line 161 with non-skid aluminumoxide

Used in heavy traffic areas such as warehouse floors or walkways.






Thiocaulk H-705A - Joint Material

Routed control joint

Depth of Thiocaulk H-705A should be of the width of the joint or crack. This can be accomplished by routing or sawing the crack.

Always use a backer rod so Thiocaulk H-705A is being pulled from 2 sides only.



Wall-Nu Trowelable - Cove

At minimum, before coating a floor or wall, fill in all cold joints. Wall-Nu Trowelable should also be used to fill in any "bug holes" in the concrete.











Wall-Nu Flexible - Crack Repair

Wall-Nu Flexible should be applied to solid concrete. This can be accomplished by routing or sawing the crack to remove all loose concrete.

Always use fiberglass cloth on cracks that may have a tendency to move.

Crack Repair

Repairs incidental cracks caused by use and settling.

Click here for more information on Crack Repair.
Click here to return to EpoSeal Table of Contents