| NAME | APPLICATIONS | UNIT SIZE | COST/UNIT | OTHER INFORMATION |
|---|---|---|---|---|
| EPO-LINE 161 GRAY | Warehouse floors Rinse/load pads Secondary containment walls & cracks | 1:1 mix ratio Covers 180 sq. ft/gal @ 8 mils DFT Approx. $.51/sq. ft./coat | ||
| THIOCAULK H-705 | Control or expansion joints Extreme moving cracks Heaving of concrete Continuous joint movement | 1:1 mix ratio Covers approx. 180 linear feet 1/2" x 1/4" Approx $.80/ft #8 Primer must be used $.22 | ||
| WALL-NU BRUSHABLE | Crack filling Cracks appearing after settling Cracks with minimal movement | 1:1 mix ratio Yield depends on application and size | ||
| WALL-NU TROWELABLE | Wall and floor seam Bug holes - small holes on wall Holes up to 1" deep Coving | 1:1 mix ratio Yield depends on application and size | ||
| FIBERGLASS CLOTH | Used to bridge cracks | 150' x 6" | ||
| 1708 PENETRATING SEALER | Used to prime concrete prior to application of Epo-Line 161 | 1:1 mix ratio; Covers 400 sq. ft./Gal. Must be used if concrete is in direct sunlight | ||
| ALUMINUM OXIDE | Aggregate used to make a non-slip surface | 100# covers approx. 1000 sq. ft. | ||
| T-100 THINNER | Used to thin Epo-Line 161 coating material for easier application to cool concrete | 1 /Gal. | $119.03 |
Use for clean-up Used at a rate of 1 pt./Gal when mixed with 161 |